Stainless steel 316 wire rope 1X19 is 100% non-magnetic and is available in very low sizes from 0.5 to 2.5 mm. weaving structure of Stainless steel 316 wire rope 1X19 consists of only one strand including 19 stainless steel wires in grade 316 and all with equal diameter. Stainless steel 316 wire rope 1X19 has the tensile strength of 1570 N/mm2 or Mpa which is firmly lower than steel wire rope 1X19 but is highly resistant against environmental corrosive substances and will non be stained when exposed to water and humidity and therefore stainless steel wire rope 1X19 does not require and surface electroplating as opposed to carbon steel wire ropes that are usually delivered as zinc plated. the body profile of the wires in the structure of stainless steel wire rope 1X19 is circle which is also cheaper compared to compact stainless steel wire ropes. SSWRC Hardware Sdn Bhd is an importer and distributor of stainless steel 316 wire rope 1X19 in Kuala Lumpur, Malaysia and Singapore with the highest quality and in high quantity.
When it comes to comparing the advantages and disadvantages of two grades of 304 and 316 stainless steel wire rope 1X19 both chemical and mechanical properties should be discussed closely. while the mechanical properties of both grades show much resemblance with tensile strength of 1570 Mpa and equal abrasion resistance and hardness, the chemical properties of stainless steel 316 wire rope 1X19 far outweigh those of grade 304 in terms of corrosion resistance and lack of interest in magnetic fields. overall, it is safe to say that stainless 316 steel 316 wire rope 1X19 lives longer and would be stained harder than grade 304 and also has no-magnetic interest as opposed to tiny magnetic interest of grade 304 and therefore, this grade has more applications in the humid weather of Kuala Lumpur, Malaysia, Singapore and east Asia.